The CrimpCenter 67 HD16 is a fully automatic swivel arm crimping machine with up to 4 processing stations. It is ideally suited for medium to large cable applications from 6 to 16 mm² (10 - 6 AWG). At a maximum feed rate of up to 12 m/s (39.4 ft/s), this versatile fully automatic crimping machine allows high quality crimping and sealing of wires at maximum productivity.
CRIMPCENTER
The CrimpCenter 67 accommodates up to seven stations (max. 3 crimp stations) and is ideal for customers with a large variety of applications such as crimping, doubling, sealing, tinning, twisting and welding. A multitude of applications can be processed with minimal set-up times.
- Maximum flexibility and high performance
- Simple operation with state-of-the-art software and touch screen
- Easy network integration with TCP/IP protocol
- Wide range of options and accessories available
The CrimpCenter 64 is a fully automatic swivel arm crimping machine with up to 4 processing stations. At a maximum feed rate of 12 m/s (39.4 ft/s), the CrimpCenter 64 allows high-quality crimping, sealing, twisting and tinning of wires from 0.13 to 6 mm² (26 - 10 AWG) at maximum productivity.
- High performance and short setup times
- Simple operation with state-of-the-art software and touch screen
- Easy network integration
- Wide range of options and accessories available
Equipped with reliable high precision technology, the CrimpCenter 36 S features a compact modular design offering space for up to 6 processing stations without compromising the high Schleuniger quality standards of the 6-Series. Various configuration possibilities allow for a variety of applications to be processed with cross sections from 0.13 to 4 mm² (26 - 12 AWG). An optimal combination of proven state-of-the-art components results in outstanding production rates.
- Compact modular design
- Great flexibility with up to 6 processing stations
- High end components for highest precision
- Easy operations with touchscreen and icon-based EASY software
- Simple network integration in existing infrastructure with standard TCP/IP
|
|
CSU (CenterStripping Unit)
 The CenterStrip CSU is designed to precisely strip insulation windows from wires and multi-layer cables in a range from 0.5 – 10 mm² (20 – 8 AWG). Short cycle times, simple operation, and easy integration make the CenterStrip CSU an ideal add-on to automatic wire processing systems such as fully automatic crimping machines or cut & strip machines.
|
|
 |
|
SLD 4100 – Double Gripper Module for CrimpCenter
The SLD 4100 double gripper module is used for double crimping applications of wires from 1 - 4 mm (0.039" - 0.157") in outer diameter. The unit gathers two single wires in the proper orientation allowing the swivel arm gripper to collect them for the crimping process. Horizontal or vertical orientation is fully programmable and no mechanical adjustments are necessary. Individual wire lengths can be different and positioning offsets can be programmed to ensure optimal crimping results.
|
|
|
|
STS 1100 –Tinning Station
The STS 1100 tinning station is designed specifically to resist the corrosive properties of lead-free solder. The station includes an integrated flux unit for tinning cross sections up to 2.5mm2 (14 AWG) and tinning lengths up to 5mm (0.2"). Cross sections up to 4 mm² (12 AWG) and tinning lengths up to 10 mm (0.39'') may be possible but testing should be done.
|
|
|
|
UniCrimp 221 A – Crimping Station for CrimpCenter Series
The UniCrimp 221 is a crimping station designed for high speed production on CrimpCenter series machines. The station includes integrated crimp force monitoring with the Schleuniger CFM 20 as well as a height adjustable base frame. It accepts most side- or rear-feed mini-style crimping applicators with either mechanical or pneumatic feed.
|
|
|
|
UniCrimp LPC A – Crimping Station for loose piece terminals
The UniCrimp LPC A crimping station processes turned loose piece terminals (closed barrel) with a cross section range from 0.14 – 4 mm² (26 – 12 AWG). With low space requirements and less than 1.5 seconds cycle time, the station has been specifically designed for use in automatic systems such as the Schleuniger CrimpCenter series of fully automatic crimping machines.
|
|
|
|
КМ-CFK – Compacting Station – Resistant Welding
The Strunk KM-CFK welding station will compact (compress, form, and bond) stripped wire ends from 0.5 up to 6 mm² (20 AWG - 10 AWG) on the CrimpCenter 6-series machines through a resistance welding process. Depending on the CrimpCenter model, one or both wire ends can be compacted or the process can be combined with other processing steps. The system includes the KM-CFK station, a separate control unit and a separate (optional) cooling unit.
|
|
|
|
SLU 3000 – Sealing Station for CrimpCenter Series
The SLU 3000 sealing station is perfectly suited for applying weather seals on wire ends with the fully automatic cut strip terminate machines of the CrimpCenter series. The compact unit with its proven technology is specifically designed for high-speed processing of almost all seal types.
|
|
|
|
STW 1100 – Twisting Station for CrimpCenter
The STW 1100 twisting station is specifically designed for twisting conductor end strands on CrimpCenter series, fully automatic strip and terminate machines . It easily handles wire sizes up to 2.5 mm² (14 AWG) and twists conductor end strands of stripped wires up to 18 mm (0.71'') stripping length. It is typically used in conjunction with the STS 1100 tinning station.
|
|
|
|
UniCrimp 500 A – Crimping Station for CrimpCenter
The UniCrimp 500 A is a crimping machine with 5 tons of press forces. It processes both rear and side feed banded terminals (open or closed barrel type) for cable cross sections up to 16 mm² (6 AWG).
|
|
|
|
CSU (CenterStripping Unit) - Прозоръчно зачистване
CenterStrip CSU е проектиран за прецизно прозоръчно зачистване на изолация на проводници и многослойни кабели в границите от 0.5 до 10 кв.мм (20 – 8 AWG). Късо време на работния цикъл, лесно опериране и интеграция правят CenterStrip CSU идеалната надстройка към автоматични обработващи системи (Cut Strip Termnate), както и към режещи и зачистващи машини (Cut & Strip).
|
|
|
|
SLD 4100 – Сдвояващ модул (позволява кримпване на два проводника с един терминал) за CrimpCenter (Double Gripper Module for CrimpCenter)
|
SLD 4100 сдвояващ модул, захваща два отделни проводника с външен диаметър от 1 до 4мм в такава правилна позиция, позволяваща на въртящото рамо на основния захващащ модул на машината да ги поеме за обработка. Проводниците впоследствие се транспортират до отделна станция, извършваща процесът на кримпване, като ги сдвоява с един кримп (терминал). Проводниците могат да бъдат с различни дължини.
|
|
|
|
STS 1100 – Покалайваща станция за CrimpCenter (Tinning Station)
|
STS 1100 е проектиран за покриване с флюс и без оловно покалайване на зачистени краища на проводници със сечение до 2.5 кв.мм (14 AWG) и покалайване на дължини до 5 мм. С опция за краища на проводници със сечение до 4 кв.мм (12 AWG) и покалайване на дължини до 10 мм.
|
|
|
|
UniCrimp 221 A – Кримпваща станция за CrimpCenter (Crimping Station for CrimpCenter Series)
|
Високотехнологичните компоненти, правят 20kN-та кримпваща преса UniCrimp 220 А, перфектното станция за високо-ефективно кримпване на CrimpCenter 36. Регулируемата височна на основата, позволява на пресата да бъде нагодена към позицията на въртящото се рамо, за постигане на много висока скорост на кримпване. Пресата прецизно обработва проводници до 6 кв.мм (10 AWG).
|
|
|
|
UniCrimp LPC A – Кримпваща станция за насипни терминали (кримпове) – (Crimping Station for loose piece terminals)
|
Кримпващата станция UniCrimp LPC A, обработва свободно-ориентирани насипни терминали (тип затворен цилиндър) със сечения от 0.14 до 4 кв.мм (26 – 12 AWG). С компактния си дизайн и време на работен цикъл по-малко от 1.5 сек., станцията е проектирана специално за използването в автоматични машини за кабелна обработка като сериите CrimpCenter на Schleuniger.
|
|
|
|
КМ-CFK – Съпротивително спояване (уплътняваща станция) – (Compacting Station – Resistant Welding)
|
Със станцията за уплътняване КМ-CFK, зачистените краища на проводници със сечение от 0.5 до 6 кв.мм (20 – 10 АWG) се уплътняват, чрез процес на съпротивително спояване, на напълно автоматичните машини от серията CrimpCenter. В зависимост от модела на CrimpCenter, единият или двата края на проводника се уплътняват, а съществува възможност и процесът да бъде комбиниран с други стъпки на обработка.
|
|
|
|
SLU 3000 – Станция за поставяне на уплътнения (Sealing Station for CrimpCenter Series)
|
Станцията за поставяне на уплътнения (Seals) SLU 3000 е перфектното решение, за поставяне на уплътнения (повишаващи устойчивостта на атмосферни влияния) на краищата на проводници, чрез автоматичните машини за рязане, зачистване и готова продукция от серията CrimpCenter. Компактното устройство, чрез доказаната си технология е специално проектирано за високо-скоростна обработка на почти всички видове уплътнения.
|
|
|
|
STW 1100 – Усукваща станция (Twisting Station for CrimpCenter)
|
Усукващата станция STW 1100 е специално проектирана за усукването на вътрешните жила на проводници, обработени чрез машините от серията CrimpCenter. Тя с лекота обработва проводници с размер до 2.5 кв.мм (14 AWG) и усуква вътрешните жила на зачистени проводници с дължина до 18 мм. Принципно STW 1100 се използва съвместно със станцията за покалайване STS 1100.
|
|
|
|
UniCrimp 500 A – Кримпваща станция (Crimping Station for CrimpCenter)
|
UniCrimp 500 A e кримпваща машина със сила на натиск от 5 тона. Обработва както задно подавани, така и странично подавани терминали (кримпове) на ролка от отворен или затворен тип за кабели със сечения до 16 кв.мм (6 AWG).
|
|
|
|
Fully automatic machines for high speed wire processing. A simple user interface, quick set-up and machine efficiency provides high productivity for a wide range of applications. Processing capabilities include crimping, sealing, tinning, twisting, and coaxial applications.
CrimpCenter 36S
Equipped with reliable high precision technology, the CrimpCenter 36 S features a compact modular design offering space for up to 6 processing stations without compromising the high Schleuniger quality standards of the 6-Series. Various configuration possibilities allow for a variety of applications to be processed with cross sections from 0.13 to 4 mm² (26 - 12 AWG). An optimal combination of proven state-of-the-art components results in outstanding production rates.
|
|
|
|
CrimpCenter 64
The CrimpCenter 64 is a fully automatic swivel arm crimping machine with up to 4 processing stations. At a maximum feed rate of 12 m/s (39.4 ft/s), the CrimpCenter 64 allows high-quality crimping, sealing, twisting and tinning of wires from 0.13 to 6 mm² (26 - 10 AWG) at maximum productivity.
|
|
|
|
CrimpCenter 67
|
|
|
|
|
CrimpCenter HD16
The CrimpCenter 67 HD16 is a fully automatic swivel arm crimping machine with up to 4 processing stations. It is ideally suited for medium to large cable applications from 6 to 16 mm² (10 - 6 AWG). At a maximum feed rate of up to 12 m/s (39.4 ft/s), this versatile fully automatic crimping machine allows high quality crimping and sealing of wires at maximum productivity.
|
|
|
|
Auto Coiling System (ACS) - Modular Coil-Binding System for CrimpCenter
The Auto Coiling System (ACS) eliminates the need for extension conveyors and significantly reduces the floor space required for long-wire applications. The system will automatically coil, bind and batch long wires during production. Binding is accomplished with tape that can be easily removed for downstream production steps.
|
|
|
|
ToolingShuttle 61 – Mobile Quick-Change Unit for CrimpCenterSeries
The ToolingShuttle 61 combines the crimp applicator (tooling), terminal reel and paper winder into one mobile quick-change unit for CrimpCenter 6-series fully automatic crimping machines. The ToolingShuttle 61 allows the operator to exchange all three elements simultaneously which significantly reduces changeover time.
|
|
|
|
ToolingShuttle 30 - Mobile Quick-Change Unit for CrimpCenterSeries
The ToolingShuttle 30 combines the crimp applicator (tooling), terminal reel and paper winder into one mobile quick-change unit for CrimpCenter 3-series fully automatic crimping machines. The ToolingShuttle 30 allows the operator to exchange all three elements simultaneously which significantly reduces changeover time.
|
|
|
|
ToolingShuttle System (TSS) – Module Quick-Change Unit for CrimpCenterSeries
 The ToolingShuttle System (TSS) is a modular system to minimize change-over times of CrimpCenter fully automatic crimping (CST) machines and consists of the following main components: ToolingShuttle, ShuttleRack, TSS Workstation and CrimpCenter.
|
|
|
|